跳到主要内容

DIYOU

                                 
                                                 Welcome distributor / wholesalers / online sellers.Contact us to get
                                               more information and free samples now!

Contact Us: Email:1187822398@qq.com
WhatsApp/WeChat+8617328907076

DIYOU Furniture - office chair manufacturer in Foshan, China

The mechanism is the part of an office chair that fails first and the part buyers understand least. There are three families in common production: butterfly, position lock, and self-weight adjusting tilt. They are not interchangeable, and the choice affects price, comfort and after-sales risk.

Butterfly mechanism

A butterfly mechanism is a compact plate mounted under the seat, operated by a single lever. It locks the backrest at one angle and releases it to recline freely. Height adjustment is usually on the same lever or a second one.

  • Cost: the lowest of the three.
  • Best for: training rooms, meeting chairs, canteens, and price-driven volume orders.
  • Limitations: no recline tension control, and no multi-angle locking. The plate thickness matters – 2.0 mm and above is what we specify for contract use.

Position lock mechanism

A position lock mechanism adds a tension knob and, in most versions, several locking positions. The user can set the recline resistance to their weight and lock the back at a chosen angle.

  • Cost: mid-range.
  • Best for: task chairs used for six or more hours a day, and markets where buyers expect an adjustable tension knob.
  • Upgrades: seat slide (moves the seat forward and back), multi-angle lock, and 3-position lock are usually available on the same platform.

Self-weight adjusting tilt

A self-weight mechanism sets recline resistance automatically from the user’s body weight. There is no tension knob to misadjust, which matters when a chair is shared or when users are not familiar with office furniture.

  • Cost: highest.
  • Best for: ergonomic and executive ranges, shared desks, and markets where the chair is a selling point rather than a commodity.
  • Limitations: it cannot be combined with a butterfly plate – the frame and plate are different. If a buyer later asks for a cheaper butterfly version of the same model, that requires a different model, not a swap.

What actually fails

Across warranty data, the mechanism failures we see are rarely the plate itself. They are:

  1. the gas lift losing pressure (usually a class issue, not a mechanism issue);
  2. the lever cable or linkage bending when the chair is lifted by the seat;
  3. loose bolts at the seat plate after repeated reclining without retorquing.

Which is why we specify SGS-certified class 3 gas lifts on ergonomic ranges, and why the assembly torque is checked at final inspection rather than assumed.

How to specify it in an enquiry

Tell the supplier three things and the mechanism question is settled:

  • the daily sitting time (under or over four hours);
  • whether one chair is shared by several users;
  • the target retail or project price band.

If the answer is “shared, long hours, mid-to-high price”, self-weight is the right default. If it is “meeting room, occasional use”, butterfly is correct and cheaper – and there is no reason to pay for a mechanism the user will never adjust.

Ask which mechanism fits your project

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注