Container loading is one of the first things a buyer checks, because it decides the freight cost per chair. This page explains how the numbers are calculated, what a 40HQ really holds, and why the figure differs so much between models.
The short answer
A 40HQ container has about 67-68 m³ of usable space. Depending on the carton size and how many chairs go into each carton, one 40HQ holds roughly 300 to 800 office chairs. The difference is almost never the chair – it is the carton.
How the calculation works
The method is simple, but three adjustments matter:
- Carton volume. Length x width x height in metres. A 730 x 720 x 610 mm carton is 0.321 m³.
- Cartons per container. Usable volume divided by carton volume. For 0.321 m³ that is about 209 cartons.
- Packing efficiency. Cartons never fill a container perfectly – aisle space, door clearance, pallet gaps and stacking height all take a share. We plan on 88-92% of the theoretical figure, which is why our published numbers are lower than a pure volume calculation.
Then multiply by the number of chairs per carton. Two chairs per carton at 209 cartons is 418 chairs; three per carton is 627.
Loading table by carton size
| Carton size (mm) | Pcs / carton | Carton volume | 40HQ (approx.) |
|---|---|---|---|
| 640 x 500 x 610 | 2 | 0.195 m³ | 620 pcs |
| 690 x 660 x 550 | 2 | 0.250 m³ | 490 pcs |
| 640 x 640 x 590 | 3 | 0.242 m³ | 760 pcs |
| 690 x 660 x 610 | 3 | 0.278 m³ | 665 pcs |
| 700 x 660 x 610 | 2 | 0.282 m³ | 435 pcs |
| 720 x 380 x 630 | 1 | 0.172 m³ | 355 pcs |
| 730 x 680 x 610 | 2 | 0.303 m³ | 405 pcs |
| 730 x 720 x 610 | 3 | 0.321 m³ | 570 pcs |
| 740 x 420 x 630 | 1 | 0.196 m³ | 310 pcs |
| 730 x 680 x 610 | 4 | 0.303 m³ | 810 pcs |
Note the last two rows: the same carton size holds 405 chairs in one case and 810 in the other, because one model packs two chairs and the other packs four. That is the single biggest lever on freight cost per chair.
Weight is the second limit
Volume is not the only constraint. A 40HQ has a payload of roughly 26-28 tonnes depending on the shipping line, and some destinations limit road weight after discharge. Chairs are light relative to their volume, so volume usually binds first – but with heavy executive models and dense cartons, weight can become the limit. We check both before confirming a quantity.
Why the number in a quotation is lower than the number here
Our published figures are deliberately conservative. The final quantity is confirmed against the actual loading list for the specific configuration, because:
- headrest and footrest versions use different cartons;
- mixed orders leave gaps that single-model orders do not;
- inner supports or corner protectors for e-commerce packing add volume.
Mixing models in one container
Mixed containers are normal for distributors. The practical limit is carton count, not model count: as long as the total cartons fit and each model reaches its MOQ of 50 pcs, we can load several series together. Send us the model list with quantities and we will return a loading plan with carton sizes, net and gross weights, and the container type that fits.
What to ask a supplier
When comparing quotations, ask for four numbers: carton size, pcs per carton, gross weight per carton, and the quantity per 40HQ. Without all four, the freight per chair cannot be compared – and freight is often 15-25% of the landed cost.
20GP and 40GP: the same maths, different numbers
Most buyers ask about 40HQ because it is the cheapest per chair, but the smaller boxes matter for trial orders and for ports where 40HQ is restricted.
| Container | Usable volume | Cartons at 0.30 m³ | Chairs at 2 pcs / carton |
|---|---|---|---|
| 20GP | about 28 m³ | about 85 | about 170 |
| 40GP | about 58 m³ | about 178 | about 355 |
| 40HQ | about 67-68 m³ | about 209 | about 405 |
The ratio is not linear: a 40HQ holds roughly 17-18% more than a 40GP for the same footprint, which is why the high cube is the default for chairs wherever the road rules allow it.
How to verify a supplier’s loading claim
Loading figures are easy to inflate, because no one can count the chairs inside a sealed container. Four things make a claim checkable:
- Ask for the carton dimensions in millimetres and check the volume yourself. A 5 cm error in one dimension changes the carton volume by 8%.
- Ask for the gross weight per carton and multiply. If the total exceeds the container payload, the volume figure is meaningless.
- Ask for a loading photo of a previous shipment of the same model – not a stock photo of a container door.
- Ask what happens if the container does not fit. A supplier who has loaded the model before will answer immediately; one who is guessing will not.
The mistake that costs the most
Buyers often compare quotations on unit price and ignore the carton. Two chairs at the same FOB price can differ by 30% in freight per chair if one packs three per carton and the other packs two. On a 40HQ, that is the difference between roughly 405 and 570 chairs – the freight per chair moves more than the price ever will.
Send us your model list for a loading plan