Mesh or moulded foam is usually decided by price, but the wrong choice shows up two years later as sagging, cracking or complaints. Here is how the two behave in real use, and what to write into a specification.
Mesh seat
A mesh seat suspends a woven fabric under tension across a frame, usually with a curved profile for support. Air moves through it, so it stays cooler in hot climates and in buildings without strong air conditioning.
- Strengths: ventilation, quick drying, no foam to compress, visually lighter.
- Weaknesses: pressure points on the thighs if the frame profile is poor; cheaper mesh relaxes over time; harder to repair than a foam seat.
- Where it wins: South and Southeast Asia, the Middle East, and any market where summer comfort is a selling point.
Moulded foam seat
Moulded foam is shaped in a closed mould rather than cut from a block. Density is consistent, edges hold their shape, and the foam can be profiled to relieve pressure under the thighs.
- Strengths: predictable comfort, better shape retention than cut foam, easier to upholster in fabric or leather for executive ranges.
- Weaknesses: warmer than mesh, heavier, and the mould cost has to be amortised across the order.
- Where it wins: Europe and North America, executive and conference seating, and any project specifying fabric or leather.
Why “standard foam” and “moulded foam” are not the same
Standard foam is cut from a block and glued to a plywood or PP board. It is cheaper, but the cut edges are less defined, and after a few years the foam can shift or compress at the front edge – the classic “sitting on the frame” complaint.
Moulded foam is formed to shape, so the density at the front edge is the same as in the middle. That is the difference buyers feel in year three, not in the showroom.
What to specify
- Density. Ask for the foam density in kg/m³ rather than “high density” – the phrase means nothing without a number.
- Construction. Foam + PP shell, foam + plywood, or foam only. The shell affects weight and repairability.
- Upholstery. Mesh, fabric or leather. If the project specifies fabric, confirm whether the seat is moulded or standard foam first – it changes the price and the look.
- Test standard. If the market requires EN 1335 or BIFMA, say so at enquiry stage rather than after sampling.
A practical default
For distributors selling into hot climates at a competitive price, mesh seat plus mesh back is the easiest specification to sell. For Europe and North America, moulded foam with fabric is what buyers expect, and the extra cost is usually absorbed in the retail price.
If a range has to serve both, specify the mesh version as the volume line and the moulded foam version as the project line – same back frame, different seat. That is how most of our series are built, and it keeps spare parts and packing simple while giving two price points.
Tell us your market and we will recommend a specification